÷AIWebGrade

Concrete Slab Cost Calculator

What your slab will cost: concrete, base, reinforcement, labor and finish.
123
Who's doing the work?
Your local prices (2026 US averages filled in)
Advertisement
</> Embed this calculator on your website: free

Contractors, suppliers and bloggers: paste this code into any page to give your visitors this calculator. It's free, needs no sign-up and stays up to date.

What goes into the cost of a concrete slab

  • Concrete. Length × width × thickness, converted to cubic yards and rounded up to the next quarter yard, the way ready-mix plants sell it.
  • Short-load fee. Plants charge extra when you order less than their minimum, often under 3 to 5 yards. Small slabs feel this the most.
  • Gravel base. 4 in. of compacted crushed stone under the slab, plus about 10% for compaction.
  • Reinforcement. Welded wire mesh for patios and walks; a #4 rebar grid for driveways and garages.
  • Labor. Forming, placing, screeding and finishing, usually priced per square foot.
  • Finish and extras. Stamping or coloring, permits, excavation, a pump truck if the truck can't reach.

Concrete slab cost by size

4 in. thick on 4 in. of gravel, wire mesh, broom finish, at the calculator's 2026 US-average prices (ready-mix $160/yd, labor $4/sq ft, gravel $40/ton). Your area can be 25% higher or lower.

SlabUseConcreteContractorDIY materials
10 × 10 ftsmall patio / shed1.5 yd$852 ($8.52/sf)$452
12 × 16 ftpatio / shed2.5 yd$1,474 ($7.68/sf)$706
20 × 20 ftpatio / 1-car pad5.25 yd$2,852 ($7.13/sf)$1,252
24 × 24 ft2-car garage7.5 yd$4,098 ($7.11/sf)$1,794
30 × 40 ftworkshop / pole barn15.75 yd$8,557 ($7.13/sf)$3,757
Advertisement

Example: a 20 × 20 ft patio

400 sq ft at 4 in. is 4.94 cubic yards; with 5% waste you'd order 5.25 yards. Add about 7.6 tons of gravel base, 9 sheets of wire mesh and 400 sq ft of labor, and the estimate comes to $2,852, about $7.13 per square foot. That sits inside the ~$6–$12 range most 2026 cost guides quote for a standard slab.

How to lower the cost of a slab

  • Pour more at once. Combining a patio and walkway into one pour can get you over the short-load minimum.
  • Do the prep yourself. Excavating, building forms and laying gravel are the easiest parts to DIY; leave the pour and finish to a crew.
  • Pick the right thickness. 4 in. is enough for a patio; going to 6 in. adds about 50% more concrete.
  • Get three quotes. Ready-mix prices can differ 15–30% between suppliers in the same town.

Before you pour

Check whether your city needs a permit (most driveways and garage slabs do), call 811 to mark buried utilities, and slope the slab about 1/8 in. per foot away from buildings. Need only the materials list? The shed foundation calculator covers slab, gravel pad and block bases, and the concrete footing calculator handles thickened edges and footings.

Frequently asked questions

▸How much does a concrete slab cost per square foot?

Published 2026 estimates commonly put a standard 4-inch slab at about $6 to $12 per square foot installed, with materials alone around $2 to $5. Thicker slabs, rebar, stamped finishes, hard site access and small jobs push the price up. Use the calculator with your local quotes for a real number.

▸How much does a 20×20 concrete slab cost?

A 20×20 slab is 400 sq ft. At 4 in. thick with a gravel base, wire mesh and contractor labor at about $4 per sq ft, the calculator's US-average prices come to roughly $2,800–$3,000, around $7 per sq ft. DIY cuts out the labor, but you'll still pay for about 5 yards of concrete and the base.

▸How much is a yard of concrete in 2026?

Ready-mix concrete is commonly quoted around $125 to $200 per cubic yard delivered in 2026, depending on region and mix strength. Small orders under a plant's minimum (often 3 to 5 yards) add a short-load fee, often $50 to $150 per truck.

▸Is it cheaper to pour concrete yourself?

Labor is usually 40–60% of a slab's installed cost, so DIY can save a lot on small, simple slabs. But concrete sets fast: a 400 sq ft slab is about 5 yards, which needs several helpers, a screed, bull float and edging tools. Large or structural slabs are usually worth hiring out.

▸Should I use bags or ready-mix for a slab?

Under about 1 cubic yard (45 bags of 80 lb mix), bags can make sense. Above that, ready-mix is usually cheaper per yard and far less work, even with a short-load fee.

▸How thick should a concrete slab be?

4 inches is standard for patios, walkways and sheds. Driveways and garage floors are usually 5–6 inches, especially for trucks or RVs. Always place it on 4 in. of compacted gravel.

Last updated November 2026. Results are estimates for planning and budgeting. Footing sizes, depths and reinforcement must meet your local building code. Check with your building department, and use a licensed engineer for anything structural you're unsure about.