Shed Foundation Calculator
</> Embed this calculator on your website: free
Contractors, suppliers and bloggers: paste this code into any page to give your visitors this calculator. It's free, needs no sign-up and stays up to date.
Three ways to build a shed foundation
- Gravel pad. 4–6 in. of compacted crushed stone inside a pressure-treated timber frame, extending about 12 in. past the shed on every side. It drains well and is the most popular DIY base.
- Concrete slab. 4 in. of concrete over 4 in. of gravel, reinforced with wire mesh. It's the strongest and the best choice for heavy equipment or a workshop, but costs the most.
- Blocks and skids. Solid concrete blocks on small gravel pads support 4×6 skids running the length of the shed. It's fast and cheap, best on firm, fairly level ground.
Material by shed size
Gravel pad 4 in. deep with 12 in. overhang · slab 4 in. thick · blocks at 4 ft spacing. No waste added.
| Shed | Gravel pad | Slab concrete | Blocks |
|---|---|---|---|
| 8 × 8 ft | 1.7 tons (1.23 yd) | 0.79 yd (36 × 80 lb) | 9 (3 skids) |
| 8 × 10 ft | 2.1 tons (1.48 yd) | 0.99 yd (45 × 80 lb) | 12 (3 skids) |
| 10 × 10 ft | 2.5 tons (1.78 yd) | 1.23 yd (56 × 80 lb) | 16 (4 skids) |
| 10 × 12 ft | 2.9 tons (2.07 yd) | 1.48 yd (67 × 80 lb) | 16 (4 skids) |
| 12 × 12 ft | 3.4 tons (2.42 yd) | 1.78 yd (80 × 80 lb) | 16 (4 skids) |
| 12 × 16 ft | 4.4 tons (3.11 yd) | 2.37 yd (107 × 80 lb) | 20 (4 skids) |
How the calculator works
Gravel: pad width × pad length × depth gives cubic feet. Divide by 27 for cubic yards and multiply by about 1.4 for tons of crushed stone. Bagged gravel usually comes in 0.5 cu ft bags.
Slab: width × length × thickness for the concrete, the same footprint at your base depth for the gravel, plus about 10% extra mesh for overlaps. Ready-mix is rounded up to the next quarter yard.
Blocks: skids are spaced across the width (never more than your max spacing), and blocks are spaced along each skid with one at each end. Each block sits on a 16 × 16 in. pad of 4 in. gravel.
Building a gravel shed pad
- Mark the pad 12 in. bigger than the shed on every side and remove the sod and topsoil.
- Build a level frame of 4×6 pressure-treated timbers and pin it with rebar stakes.
- Lay landscape fabric to stop weeds and keep the gravel from sinking into the soil.
- Add gravel in 2 in. layers, compacting each with a plate compactor or hand tamper.
- Screed the surface level and check it in both directions before setting the shed.
Which foundation should you choose?
On sloped lots, a gravel pad needs a taller timber frame on the low side; past about 8 in. of slope, blocks or piers are usually easier. In freeze-thaw climates, gravel pads and skids move slightly but evenly, which most sheds tolerate. For a large shed, a garage-style building, or anything attached to utilities, consider frost-depth piers with the Sonotube calculator or a footing from the concrete footing calculator.
Frequently asked questions
▸How much gravel do I need for a shed base?
For an 8×10 shed with a pad extending 12 in. past each wall and 4 in. deep, you need about 40 cu ft, which is about 1.5 cubic yards or 2.1 tons of crushed stone. A 10×12 shed needs about 2.9 tons. Add 10% for compaction.
▸What is the best foundation for a shed?
For most backyard sheds up to about 12×16, a compacted gravel pad inside a timber frame is the best value. It drains well, is forgiving of slight slopes, and is DIY-friendly. A concrete slab is better for heavy loads like riding mowers or workshops. Blocks with skids are fastest for small sheds on firm, level ground.
▸How thick should a shed slab be?
4 in. of concrete over 4 in. of compacted gravel is standard for storage sheds. Go to 5–6 in. if you'll park a riding mower, ATV or other vehicle inside. Add welded wire mesh or fiber reinforcement to control cracking.
▸How much concrete do I need for a 10×12 shed slab?
At 4 in. thick, a 10×12 slab is 40 cu ft, or 1.48 cubic yards. Order 1.5 yards of ready-mix, or about 74 bags of 80 lb concrete (67 bags plus 10% waste).
▸How many blocks do I need for a shed foundation?
For an 8×10 shed with skids no more than 4 ft apart and blocks every 4 ft along each skid, you need 3 skids with 4 blocks each, or 12 blocks. Larger sheds or heavier contents need closer spacing.
▸Do I need a permit for a shed?
The International Residential Code exempts one-story accessory buildings up to 200 sq ft from a building permit, but many towns set a lower limit (often 100–120 sq ft) and almost all have setback rules. Check with your local building or zoning office first.
Last updated November 2026. Results are estimates for planning and budgeting. Footing sizes, depths and reinforcement must meet your local building code. Check with your building department, and use a licensed engineer for anything structural you're unsure about.